Factory Test & Alignment Specification For MT56-AP Series (V1.0)
12
the ID. There are two methods to modify the ID:
Change Project ID in Design Menu
In case of “
Design mode hotkey
” is enabled, press “
Back
” button to enter
Design Menu
. To modify
Project ID, you need to go through “
Service menu
Project ID
”, then press
Left
or
Right
key to
select suitable ID (Project name is dynamically refreshed). Finally restart the TV set.
In case of “
Design mode hotkey
” is unabled, you can enter the
Design Menu
easily with reference
to
3.1 Design Menu.
Change Project ID with RCU
Press “
062598
”+”
Menu
”+”
XXX
”
(XXX represents project
ID you’d like to switch to)
in the remote
control and wait about half minutes, When the set restart automatically, you have successfully
changed project ID.
Here below is none exhaustive ProjectID table for reference:
MODEL
ProjectID
Panel Name
L40S4690FS
001
LVF400NEAL
4.3 Function Test
Once the Project ID is correct and the TV display normally, plug all external generator devices to relevant
inputs/outputs below according to their respective test patterns format and check picture content and
sound quality accordingly:
Source
Test Signal
Test Pattern
RF Input
(PAL/DVB/DVB-T2)
RF cable
Factory signal
AV
(CVBS)
Chroma/Fluke generator
PAL Half Color & Gray bars
VGA
Chroma/QuantumData
generator
1024x768@60Hz
Half Color & Gray bars
HDMI
(Video & Audio)
DVD with HDMI compliancy
Movie 720p@60Hz
LAN
(RJ45)
Ethernet
Any network
Audio OUT
RF signal
Suitable channel
USB
Video/MP3/Image
Home/Media/
SPDIF
DOSS
Audio output
PCMCIA
TV source
Suitbale PCMCIA Card
