65
8. Place the cover cap back
into the machine in front
of the brewing unit. It is held
in place by magnets.
Cleaning the milk system
When frothing milk, you should disassemble the milk system as shown
in the following steps
once a day (ideally after the last use or at
the end of the day).
All parts should be cleaned in warm water using
a mild washing-up liquid
;
these parts are not dishwasher-safe
.
This is the only way to ensure maximum hygiene, high-quality milk
froth and a long service life for the machine.
Cleaning must be carried out in addition to the regular rinsing of the
milk system.
Disassembling and cleaning the milk system
1. Remove the milk froth
rotary control by sliding
it to the side.
2. Remove the silicone tube from
the milk froth rotary control.
3. Remove the stainless steel
wand from the tube.
4. Pull the rotary dial off
the milk froth control.
5. Remove the cover from
the coffee/milk spout.
6. Fold the milk spout to
the front and remove it.
en
106466 en Esperto_Pro_v5.indd 65
14.06.21 12:24
