54
Default settings upon purchasing the machine:
Milk froth
approx. 130 ml
(depending on the position of the rotary control)
We recommend that you always rinse the milk system
immediately
after preparing
beverages with milk. See section “Rinsing the milk
system”.
Tip
: You can customise the amount of milk froth. Learn more about how
to do this in the chapter titled “Adjusting the amount of the beverage”.
Rinsing the milk system
Milk goes off quickly. For the perfect milk froth and to ensure optimum
hygiene, we recommend rinsing the milk system
every time after
preparing
beverages with milk. Rinsing the milk system must never
replace daily cleaning. Clean the milk system at the end of the day
as described in the section titled “Cleaning”.
Each time a beverage is
prepared that contains milk,
the
EasyClean
button will
flash for a few seconds.
This indicates that the milk
system should be rinsed.
1. Fill a cup or glass with fresh,
clear tap water or drinking
water.
2. Insert the stainless steel
wand into the water.
3. Place an empty container
underneath the milk/coffee
spout.
4. Set the milk froth rotary
control to the medium setting.
5. Press the
EasyClean
button
once briefly to rinse out the
pipes and hoses that connect
to the milk spout.
The machine will heat up and the rinse cycle will start and end automatically.
en
106466 en Esperto_Pro_v5.indd 54
14.06.21 12:24