The Setup menu
71
Preset Up & Tap setting
When a footswitch is assigned to Preset Up, tapping that foot-
switch will switch to the next preset.
Holding
the footswitch
temporarily enters Tap Tempo mode.
Hit & Talk setting
When a footswitch is assigned to Hit & Talk, tapping that
footswitch will cycle Hit mode.
Holding
the footswitch enters
Talk mode.
Hit & Key setting
When a footswitch is assigned to Hit & Talk, tapping that
footswitch will cycle Hit mode. Holding the footswitch allows
Harmony key input via a special menu.
Loop Record/Play setting
When a footswitch is assigned to Loop Record/Play, tapping
that footswitch will switch to Loop Record mode. Tapping the
footswitch again will switch to loop playback.
Loop Stop/Clear setting
When a footswitch is assigned to Loop Stop/Clear, tapping that
footswitch will stop playing the loop. Holding the footswitch
will clear the loop.
Loop Undo setting
When a footswitch is assigned to Loop Undo, tapping that
footswitch will immediately undo the previous Loop recording.
Tapping the footswitch again will restore (redo) the recording.
Loop Start/Stop setting
When a footswitch is assigned to Loop Start/Stop and a loop
exists, tapping the footswitch will start playback. Tapping the
footswitch again will stop playback. There are no record or hold
functions in this mode.
1 Button Looper setting
The 1 Button Looper setting is a convenient way to control all
relevant Looper functions using a single footswitch. This allows
you to assign the two remaining buttons on a Switch-3 for other
features (e.g. Hit).
– With no loop present, tap the footswitch once to record.
– Tap the footswitch again to define the loop length and
switch to loop playback.
– Tap the footswitch again to overdub during playback.
– Hold the footswitch to undo the last overdub.
– Hold the footswitch again to restore (redo) the last over-
dub.
– Tap the footswitch twice quickly to stop.
Содержание VoiceLive Touch 2
Страница 98: ...Getting Support 92 Getting Support ...