The Setup menu
57
Loop setting
When Mic Control is set to Loop, the Mic Control button acts
as a
1 Button Looper.
See the 1 Button Looper setting sec-
tion for details.
Loop Start/Stop setting
When Mic Control is set to Loop Start/Stop, the Mic control
button allows only starting and stopping of an existing loop with
no hold functions.
Harm + H. Hold setting
When Mic Control is set to Harm + H. Hold,
tapping
the Mic
Control button latches the Harmony effect on or off with each
tap.
Holding
the Mic Control button while Harmony is active
engages the Harmony Hold effect.
Tone Style parameter
The Tone feature engages four automatic audio signal proces-
sors that adjust the EQ and dynamic nature of your vocals.
The overall effect is to reduce mud, brighten your vocal sound
and reduce level peaks to make your live voice sound more like
a studio recording. There is also a noise gate that helps reduc-
ing problems when you
aren’t
singing, such as feedback and
harmony chattering.
These processes are automatic and respond to your specific
voice. When active, Tone remains on, even in Talk mode.
Off setting
When the Tone Style parameter is set to Off, Tone is disengaged.
Normal setting
For most voice types and PAs, Normal is the correct setting. This
is also the default setting.
Less Bright setting
If feedback is a problem, or when you are using a condenser
mic, you can try the Less Bright setting to reduce high frequen-
cies slightly.
Содержание VoiceLive Touch 2
Страница 98: ...Getting Support 92 Getting Support ...