TC-Helicon VoiceLive Touch 2, Справочное руководство

Страница: 57 / 98

The Loop Menu
51
Re-sync
Re-sync is another component of Loop Assist.
If you use any of the time-altering loop effects (Slow Speed,
Squeeze or Shots), you don’t want your loop timing to stumble.
Re-sync works automatically in the background to keep track
of the correct order of beats when using these effects. Upon
releasing the effect, loop playback continues where it would
have been as though there had been no interruption.
This is especially useful if you are syncing the looper to a com-
puter with MIDI Clock.
Re-sync also returns loop playback to the correct position
when you have triggered loops “wildly” or un-synched in Shots
mode. When you return from Shots mode to Select mode,
playback is automatically synched to the previous rhythm. Re-
sync will occur whether the metronome is on or off.
Layer Mixdown
The ability to mute and erase loop layers independently is use-
ful but eventually you may run out of layers. In that case, you can
mix multiple loop layers down to one slot, freeing up loop slots.
Mixdown is also useful when you want to Reverse or trigger
Shots of all your tracks. Mixdown is not undo-able.
– Record several loops into several loop slots (see “Recording
multitrack loops”).
– Press the Loop mode button.
When the Loop Tools page is displayed, press the Loop
mode button again to bring up the Loop Layers page.
– Tap the Select button.
– Tap the button of the target slot, i.e. the loop slot that you
want to mix down to.
– Hold the Select button.
– Tap Select to confirm mixdown action.
All
audible loop layers will be mixed down to the selected
target slot, and the original layers will be cleared.
If the selected target loop layer is audible when you perform
the mixdown, its content will be mixed down along with all
other loop layers.