TC-Helicon VoiceLive Touch 2, Справочное руководство

Страница: 70 / 98

The Setup menu
64
Loop page
There are several useful Loop-related parameters on the Loop
page of the Setup menu.
Input parameter
While VoiceLive Touch 2 has vocal, guitar and aux inputs, you
can separate out which inputs you want to loop.
Lead + Guitar setting (default)
Your voice plus the guitar and its EQ and effects are looped.
Input coming from the Aux in jack is not looped.
Guitar setting
Only the EQ’d and effected guitar is looped. Your voice and
input coming from the Aux in jack are not.
Lead setting
Only your voice and the vocal effects are looped. Guitar and
aux input are not.
Aux setting
Only audio arriving at the Aux in jack is looped.
Filter Resonance parameter
The Filter Resonance parameter changes the sound of the
Loop FX filter by reducing or increasing the mid boost at the
filter frequency.
Undo parameter
Setting Undo to On allows you to undo the previous recording
when recording loops. Setting Undo to Off doubles the amount
of looping time – but of course, at the expense of the ability
to undo overdubs.
Loop Feedback parameter
At the default setting (98%), the Loop Feedback parameter
helps prevent overdriving and distortion that can occur when
a large number of overdub layers exceed the output capability
of the unit. Any setting less than 100% will gently reduce the
amount of audio fed back into the loop during each successive
overdub.