IN GAIN
Sets and displays the MIC / LINE input level. Both inputs
share the same gain settings and are not meant to be
used simultaneously; switching from a Mic to a Line level
signal will likely require resetting IN GAIN. To set input
level automatically, use the AUTO MIC-GAIN function
by pushing and holding the REVERB footswitch and
following the prompts.When any digital input is selected
(USB or SPDIF) the IN GAIN does not control the
digital input level. Use your transmitting device to adjust
level.
PHANTOM
Turns 48V phantom power on and off for use with
condenser microphones. Note that VoiceLive 2 stores a
different IN GAIN for PHANTOM ON and OFF states.
This is ideal as it unlikely a condenser and dynamic
microphone will ever require the same IN GAIN for a
single singer.
AUX LEVEL
Set the input level of for the Aux input.
OUTPUT
The configures the outputs to be STEREO (default) or
MONO. In MONO mode, the left output is the summed
mono mix of VoiceLive 2 including effects. The right
output is dry with only Tone applied to the MIC or LINE
input signal. This is useful when a live sound engineer
wants to control the balance of wet/dry mix at the mix
position. In this case, set LEAD MUTE to ON.
LEAD MUTE
Turns the lead voice off in all presets.This is useful in the
live sound engineer setting described above or when
VoiceLive 2 or is being fed by an aux send from a mixer
channel where the lead level is mixed in at the mixing
console.
LEAD DLY
When set to NONE (default), the lead voice is sent
through VoiceLive 2 with the shortest possible latency
inherent to the system. When set to VOICE SYNC, the
lead voice is delayed slightly to synchronize with the
processing latency of the harmony voices.
The Setup Menu: I/O Tab
82
Содержание VoiceLive 2
Страница 1: ...USER S MANUAL...
Страница 9: ...9 Front Panel 1 2 4 5 6 7 8 9 3 11 10 12 13 14 15 16 17 18...