I don't hear any audio from VoiceLive 2 when
using MIC in
1. Check that the DIGITAL IN parameter in the
Setup I/O tab is not set to USB VOX L / INST R or
DIGITAL VOX L / INST R.
2. Check to see if there is level in the INPUT meter
when singing. If not, check connection and run MIC
GAIN setting procedure.
3. It's possible LEAD MUTE is enabled globally in the
Setup I/O menu, set it to OFF to change.
4. Turn off all effects, one of the effects could have
LEAD MUTE enabled.
I can't update my software
If USB is connected, check the USB CONTROL
parameter under the SETUP / SYSTEM page. If it's set to
OFF, you will not be able to upgrade software.When it's
set to ON, you will be able to upgrade software but not
be able to use a MIDI keyboard connected to the MIDI
IN to control harmony.
MIDI Input doesn’t work
See “I can’t update my software” above.
My lead vocal is cutting out
1. Is the FX button on? Adjust the Transducer GATE
THRESHOLD to a lower value in that preset.
2. Is the Tone button on? Check the GATE tab. See
the section following for more detail on adjusting
the GATE settings.
The edit asterisk is always on in preset names
The LEAD MUTE parameter in the Setup I/O menu may
be set to ON.
Where can I find support for this product?
There are three easy ways to get support:
1. Install the VoiceSupport application
2. Visit www.tc-helicon.com/support
3. Email [email protected]
FAQ and Troubleshooting
38
Содержание VoiceLive 2
Страница 1: ...USER S MANUAL...
Страница 9: ...9 Front Panel 1 2 4 5 6 7 8 9 3 11 10 12 13 14 15 16 17 18...