TC Electronic Mastering 6000 Скачать руководство пользователя | Manualshive

Страница: 32 / 33

background image

32

INSTALLING THE TC ICON SOFTWARE EDITOR

The TC Icon Software Editor for PC and Mac is a fully
operational software version of the TC Icon Remote for
the System 6000. The software is free to download for
evaluation BUT to actually operate a System 6000 via
the Editor a license for each connected mainframe
must be purchased from TC Electronic.

To achieve the TC Icon Software Editor

• Download software directly from www.tcelectronic.com
• Call your local dealer
• Call TC Electronic headquarters

+45 87427000
or USA: 8053731828

To purchase a Mainframe License for the TC Icon
Software Editor

• Purchase directly via www.tc-now.com
• Call your local dealer
• Call TC Electronic headquarters

+45 87427000
or USA: 805 3731828

Installation - PC

System Requirements

• Pentium 233MHz or better
• 32MB RAM
• Windows 95, 98, or 2000
• WinZip installed

Updating/installing the TC Icon Software Editor

Your computer probably holds the required MS Installer
program and you only need download the:

TC Icon Software Editor - PC version

This is a “.msi” file type and the size of this file is
approx. 775kB

• Close all other programs than your web browser and

access www.tcelectronic.com

• Access: Download, Software updates

Press TC Icon Software Editor for PC to download

• Click Finish in the Setup Wizard
• Click Close

A TC Icon shortcut will appear both on the desktop and in
the Start menu.

Previous versions of the TC Icon Editor will
appear in the Control Panel Add/Remove menu.
To retrieve these shortcuts you must reinstall the
TC Icon Editor software.

Installation including the Windows MS Installer

If during the process described above you have discovered
that the required MS Installer program is NOT already on
you computer you should download the:

TC Icon Software Editor (PC only)
+Windows Installer

This file includes both the Microsoft Installer Service as
well as the TC Icon Software Editor
The size of this file is approx. 3.5MB
• Close all other programs than your web browser and

access www.tcelectronic.com

• Select Support
• In the Support Menu on the left side, choose "System

6000" from the "Software" drop-down menu.

• Enter your Login data and proceed to download the:

“PC Upgrade” - application. You can either open the file
directly or download it and then open it.

• Run the application.
• Follow the on-screen instructions and click "Finish" when

the Setup Wizard has installed the Editor.

A TC Icon shortcut will appear both on the desktop and in
the Start menu.

Installation - Mac

System Requirements

• Apple G3 or G4
• MacOS 9.2 or higher / OS X
• Minimum of 64MB RAM
• Stuffit Expander installed

Installation

• Close all other programs than your web browser and

access www.tcelectronic.com

• Select Support.
• In the Support Menu on the left side, choose "System

6000" from the "Software" drop-down menu.

• Enter your Login data and press “Click here to read the

comprehensive guide for Mac users”.

• Follow the instructions.

«
...
30
31
32
33
»

Содержание Mastering 6000


































Отзывы:

Нет отзывов

Похожие инструкции для Mastering 6000

Бренд: Raymarine Страницы: 464

Бренд: 3M Страницы: 8

Бренд: ZOLL Страницы: 3

Бренд: SALUDA MEDICAL Страницы: 61

Бренд: Parker Research Corp Страницы: 4

Бренд: Eastwood Страницы: 20

Бренд: Daihan Scientific Страницы: 43

Бренд: ZIGBEE Страницы: 6

Бренд: Daisy Страницы: 2

Below Ground Pool Cover Box

Бренд: Daisy Страницы: 3

Бренд: EASTERN INSTRUMENTS Страницы: 93

Бренд: EarthQuake Страницы: 12

Бренд: Pari Страницы: 2

Growers Supply 109722

Бренд: FarmTek Страницы: 9

Бренд: Pablo Страницы: 7

Бренд: iHealth Страницы: 8

Бренд: MacDon Страницы: 46

Бренд: MacDon Страницы: 82

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды