TC Electronic G-Major, Руководство пользователя

Страница: 9 / 52

7
FRONT PANEL OVERVIEW
FRONT PANEL KEYS
GENERAL INFORMATION
A single click will activate/
deactivate the effect. Double
clicking on the key will enter
the Edit menu of the effect
algorithm.
Lit key LED indicates active
effect block.
NOISE GATE KEY
On/off key for the Noise Gate
block.
LEVELS ALL/ RELAY 1+2
Press to access global Level
parameters, Kill Dry function
and settings for the two Relay
switches that will allow you to
e.g. switch channels on you
combo/head or preamp.
COMP
On/Off key for the Compressor
block.
CHO/FLA
On/Off key for the Chorus/
Flanger block.
FILTER/MOD
On/Off key for the Filter and
Modulation block.
DELAY
On/Off key for the Delay block.
PITCH
On/Off for the Pitch block.
REVERB
On/Off key for the Reverb block.
ROUTING
Press to access the Routing
section. This is where you
select the routing of your effect
blocks.
MOD
Press to access the Modifier
section. This is where you
setup which parameters that
should be controlled externally,
e.g. via a connected
Expression Pedal.
I/O
The I/O menu is where you
control all Input and Output
related parameters.
MIDI/UTIL
Press to access all MIDI and
other general parameters.
RECALL
Press RECALL to initiate a
recall operation. Use the EDIT
wheel in the Control section
(inner wheel) to select preset.
Then press ENTER (EDIT
wheel) or RECALL to confirm
operation.
STORE
Press STORE once to initiate
a store operation. Select
location using the EDIT wheel
in the Control section (inner
wheel). Now press ENTER to
confirm operation.
The name of the preset can be
altered before pressing
ENTER for confirmation. To do
so use the PARAMETER
wheel in the Effects section to
select letter-space and the
VALUE wheel to select letter.
When the name is set press
ENTER twice to confirm entire
STORE operation.
PARAMETER WHEEL
(Outer)
EDIT WHEEL (Inner)
ENTER (Push for Enter
function)
These two wheels are used to
handle all setup and non-
effects related parameters.
The PARAMETER wheel is
used to select parameters.
The EDIT wheel is used to
adjust values.
Push the EDIT wheel for Enter/
Confirm functions.
TAP
Tap to enter global tempo.
Effects related to tempo as
e.g. the Delay block can use
this tempo or a subdivision
thereof. The LED in the key
will blink according to the
current global tempo.
BYPASS ALL
Press to bypass all effects.
Press and hold for approx. 1
sec to mute Outputs for e.g.
silent tuning.