TC Electronic G-Major, Руководство пользователя

Страница: 16 / 52

14
Store
To store a preset with the same name:
• Press STORE.
If the preset you are about to store is a
Factory preset the G•Major suggests the first
available User location but you can select
any of the 100 locations using the EDIT
wheel. If the preset you are about to store is
a User preset, the G•Major suggests the
current location of the preset.
You can, however, store at any of the 100
User locations. Select location using the
EDIT wheel.
• Press ENTER twice to confirm store
operation.
To rename a preset while storing:
• Press STORE. If the preset you are about to
store is a Factory preset the G•Major
suggests the first available User location but
you can select any of the 100 locations using
the EDIT wheel. Press ENTER once.
• Select storing location using the CONTROL
EDIT wheel.
• To alter the preset name; use the
PARAMETER wheel to move cursor and the
EDIT wheel to select character.
• Press ENTER twice to store the preset with
the new name.
Presets Backup Via MIDI
The User bank can be dumped for backup via
MIDI to either a sequencer or another G•Major.
This is how to do it:
• Connect G•Major MIDI Out to MIDI In on
either another G•Major or sequencer.
• Enter the Utility menu by pressing the
MIDI/UTIL key and scroll to select “Bulk
Dump” using the CONTROL
PARAMETER wheel.
• If connected to another G•Major simply press
ENTER and the entire User bank will be
copied to the other G•Major.
• If connected to a sequencer let the
sequencer record in OMNI mode (all channels)
and press ENTER on the G•Major.
The G•Major is always ready to receive a
MIDI Bulk Dump.
Simply connect MIDI Out from the device you
are dumping from to MIDI In on the G•Major. If
you are dumping from a sequencer, simply play
the sequence holding the BULK information. If
dumping from a G•Major - see above!
I/O Setup
In the I/O menu you will find all I/O related
parameters such as Input/Output settings,
analog/digital, Status Bit and Dither. For any
successful operation of the G•Major these
parameters must be correctly set!
All parameters in the I/O menu are “”general”
parameters that are not stored with the presets.
Basic Operation
• Press I/O
• Select parameters using the PARAMETER
wheel in the Control Section.
• Change values using the EDIT wheel.
Input
Select between Analog and Digital.
Analog Input
When "Analog" is selected the G•Major
automatically defaults to the internal 44.1kHz
clock as Sample Rate.
Digital Input
When "Digital" is selected the G•Major attempts
to lock to the S/PDIF Input. During the lock-up
period the LOCK icon blinks indicating none or
unacceptable clock, and the Outputs are
muted.
When lock is achieved the LOCK icon turns
solid, and the Outputs are un-muted.
Clock
Analog Input
When Input source is analog the following
Sample Rates are available:
Internal 44.1kHz : The G•Major runs at
internal 44.1kHz.
Internal 48kHz : The G•Major runs at
internal 48kHz.
Digital : The G•Major locks to the
incoming Digital clock.
Digital Input
When Input Source is digital the following
Sample Rates are available:
Internal 44.1kHz : The G•Major runs at
internal 44.1kHz.
Internal 48kHz : The G•Major runs at
internal 48kHz.
Digital : The G•Major locks to the
incoming Digital clock.
PRESET HANDLING I/O SETUP