TC Electronic G-Major, Руководство пользователя

Страница: 25 / 52

23
CONTROLLING THE G•MAJOR
CC value or pedal connected to the Pedal
Input. A MIDI CC value above 64 will set the
current preset to 0dB. A MIDI CC value below
64 will set the current preset back to the preset
level.
When a new preset is recalled, the PresetBoost
controller is reset (a value below 64 is sent
out). This will allow for an update of the LED
status on your footcontroller given that the MIDI
Out of the G•Major is connected to the MIDI In
on your footcontroller. Please note that if the
Preset Level parameter in the Levels All menu
is set to 0dB, no boost will be possible.
For further instructions on how to set up the
PresetBoost function please read the example
on page 24.
Global Out Level *
Remote control of the Global Out level.
Relay 1 & Relay 2
Remote control of Relay 1 and 2.
Comp On/Off
On/off toggle of the Compressor via an external
controller.
Filter On/Off
On/off toggle of the Filter block via an external
controller.
Pitch On/Off
On/off toggle of the Pitch block via an external
controller.
Cho/Flg On/Off
On/off toggle of the Chorus/Flanger block via
an external controller.
Delay On/Off
On/off toggle of the Delay block via an external
controller.
Reverb On/Off
On/off toggle of the Reverb block via an
external controller.
Noise Gate On/Off
On/off toggle of the Noise Gate via an external
controller.
EQ On/Off
On/off toggle of the EQ via an external
controller.
External Control Using Modifiers
Assigning Modifiers
There are two steps in assigning an external
controller to control a specific parameter.
Step 1 - Assigning Modifiers to External
Control
• Press MOD to enter the Modify menu and
select MOD 1-4 using the CONTROL
PARAMETER wheel.
• Turning the EDIT wheel clockwise you can
now select between the following options
determining how the Modifier should be
controlled. The Options are:
Off, Learn, Pedal, CC 1-128.
Learn
• Press ENTER and the display will blink
showing that you are in the Learn mode for
the Modifier.
• Now you must show the G•Major which
connected external controller you will use to
control the modifier. Either send a CC (e.g.
by pressing one of your MIDI pedals CC
buttons) move your Expression pedal or
press your connected switch.
* A dedicated response curve for each of the
level parameters in the MOD menu is
available. You will find that depending on the
Expression pedal type you are using different
curves may be ideal.
Press ENTER and use the PARAMETER and
EDIT wheels to set three curve points: Min,
Mid and Max. - See also next page for a
more detailed explanation on “Setting a
Modifier Response Curve”.