FRONT PANEL
6
POWER
Electronic POWER key
»Easy touch«
Turn on the device with a
single light touch. To turn off
the device you must press
and hold down the POWER
key approx. 3 seconds.
This delay time is to avoid
switching off the device by
accident.
CARD SLOT
The Finalizer Express is
ready for future software
update possibilities through
the PCMCIA slot.
SELECT INPUT
Toggles between the analog
Inputs and any of the three
digital Inputs.
ANALOG IN
Controls the analog Input gain.
INPUT/OUTPUT METERS
The high resolution LED meters
show the Input and Output level
of the Finalizer Express. The
Clip LEDs indicate digital
clipping on the Input or Output.
NORMALIZER CLIP
Indicates digital clipping in the
Normalizer section.
OPTO, AES/EBU, S/PDIF
Indicates the selected digital
Input.
44.1, 48kH
Z
Indicates the incoming Sample
Rate. These LEDs will blink
when either unacceptable clock
or no clock is present at all.
GAIN REDUCTION METERS
Shows the gain reduction of the
Compressor and Limiter.
MIDI
Indicates incoming MIDI
information, the LED will blink
accordingly.
NORMALIZE GAIN
Sets the gain of the Normalizer
section. This parameter
determines how hard the
Compressor is driven.
SOFTCLIP
Sets the Softclipper of the
Normalizer section On/Off
.
