TC Electronic DB6, Руководство пользователя

Страница: 51 / 174

Obtaining DB6 status information
DB6 English Manual (2014-10-07) 48
Please note that the LEDs on the front of a DB6
will display basic status information as long as
the device is powered – see “Front panel indica-
tors” on page 26.
Additional status information can be obtained
using TC Icon, where you can also define how
certain error states should be indicated on the
device.
To display status information about DB6, go to
Frame / System / Status.
Fig. 24.: DB6 Single/Multi Status page
This page will display the following status infor-
mation:
Clock section
Source indicator
Indicates the source of the clock signal DB6 is
currently following.
Lock indicator
Indicates wether synchronization has been
achieved. If no synchronization has been
achieved, a red LED will be shown in this field.
Nominal Rate indicator
Shows the detected sample rate of the signal
DB6 is synced to.
Status section
Power indicator
Displays the current state of the DB6 power sup-
plies.
A power supply failure may be indicated as de-
scribed under “Power Warning parameter” on
page 48.
Power Warning parameter
A failing supply is always indicated by a red LED
on the front panel of the device. TC Icon can also
indicate a failing power supply, depending on the
setting of the “Power Warning” parameter.
“Off” setting
A failing power supply is not reported in the Icon
remote app.
“Warning” setting
A failing power supply is indicated by a yellow
“Power” label in the respective DB6 Frame in-
dicator, and a yellow LED will be shown on the
Frame tab when it is selected.
“Error” setting
A failing power supply is indicated by a red
“Power” label in the respective DB6 Frame indi-
cator, and a red LED will be shown on the Frame
tab when it is selected.