Drive system
Motors
Changing the motors to a different 1806 type requires that the mounting pattern and wire connection is
compatible, or modified to fit. The mounting pattern on the arms will fit 22 x 22 mm motors.
R/C receiver
Traditional PWM receiver install
It is possible to install a 5-channel receiver using individual servo cables for each channel (instead of
PPM/S-BUS/D-BUS).
On the left side of the I/O board is a single row with seven ports (5V, GND, CH1 to 5). The first three ports are
also directly connected to the PPM header.
1. Either solder a pin header to the ports or directly solder the servo wires. Use the two first ports to
power your receiver and the rest to individually hook-up the control signals (thr, pit, rol, yaw, fm)
49
