Status LED
The LEDs on the main controller board shows the state of the system, according the following table. The red
LED is located on the front while the blue and green is located on either side of the micro-USB connector.
LED Color
Description
Red slow flashing
No transmitter detected
Red rapid flashing
Bind mode (>10 sec. after power on if no radio detected)
Red solid
Bound to transmitter and active
Green off
Flight controller disarmed
Green solid
Flight controller armed - ready to fly
Green flashing
Gyro calibration (on power up) or low battery (when armed)
Blue off
Accelerometer inactive - rate/acro flight mode
Blue solid
Accelerometer active - angle/horizon/air mode
Ready to fly!
With the receiver bound to the radio, video feed set up, and battery charged, you are ready to fly!
16
