tbs electronics SHURCut 2500, Руководство оператора

Страница: 8 / 26

8 | P a g e
G e n e r a l D a t a H e a l t h c a r e , I n c .
Section1 | Safety Instruction
Summary
This instrument was built and tested in accordance with the safety regulations as specified below:
Gb9706.1-1995 medical electricity equipment
Note
：
Safety instruction labels on the instrument must be kept in the original place to
avoid an accident, personal injury, or damage to the instrument.
Safety Notes
The following instructions are regarding the transport, installation, regulation, operation
and maintenance of the instrument which must be read and complied with.
Warnings-Transport and Installation
The instrument may only be transported in an upright position.
Never lift the instrument by the hand wheel or the cassette clamp. Always
remove the section waste tray and blade holder before transporting the
instrument.
Check to make sure that the voltage available at your facility complies with the
requirements of this unit.
Connect the unit using the power cable provided. It is critical to connect to a
grounded socket.
Do not operate in rooms with explosion hazards.
Do not tamper with the safety devices of the unit.
Warnings-Working with the Instrument
Take great care in handling microtome blades. The cutting edge is extremely
sharp and can cause serious injury.
Always remove the blade and put in a safe location before detaching the blade
holder from the unit.
Always clamp the specimen block before inserting or clamping the blade.
Always keep the hand wheel locked when handling the blade or specimen on
the unit. Cover the cutting edge with the blade guard.