tbs electronics SHURCut 2500, Руководство оператора

Страница: 13 / 26

13 | P a g e
G e n e r a l D a t a H e a l t h c a r e , I n c .
4
5
6
Electrical Connection
Check to make sure that the voltage available at your facility complies with the
requirements of this unit.
Connect the unit using the power cable provided. It is critical to connect to a
grounded socket.
Before changing a fuse, make sure to disconnect power from the unit.
1. Insert the fuse (6) into the fuse socket (5) as it is
showed in the picture and the insert the whole fuse
socket into the
socket (4).
2. Energize the equipment with the switch at
the rear right side. The instrument should
initialize.
3. After the microtome is energized, the display
field in the control panel will illuminate. The
specimen holder will automatically retract
back to zero. This is followed by a beep.