TBK-NVR2100 Network Video Recorder User Manual V2
122
Make sure the router support the configuration of internal port and external port in
the interface of Forwarding.
Go to
Menu
>
Configuration
>
Network
.
Select
NAT
to enter the port mapping interface.
Leave the Enable UPnP checkbox unchecked.
Click
to activate the External Port Settings dialog box. Configure the external
port No. for server port, http port, RTSP port and https port respectively.
The value of the RTSP port No. should be 554 or between 1024 and 65535, while the
value of the other ports should be between 1 and 65535 and the value must be
different from each other. If multiple devices are configured for the UPnP™ settings
under the same router, the value of the port No. for each device should be unique.
Click
OK
to save the setting for the current port and return to the upper-level
menu.
Click
Apply
to save the settings.
Enter the virtual server setting page of router; fill in the blank of Internal Source
Port with the internal port value, the blank of External Source Port with the
external port value, and other required contents.
Each item should be corresponding with the device port, including server port, http
port, RTSP port and https port.
External Port Settings Dialog B
ox
Setting Virtual Server Item
