17
OSD Menu Instructions
☞
NOTE:
-
If the IRIS menu is set to ELC mode, the FLICKERELSS menu will be
deactivated.
-
If the SHUTTER menu is set to AUTO or FIX mode, the FLICKERLESS menu
will be deactivated.
-
If the SENS-UP menu is set to FIX mode, the FLICKERLESS menu will be
deactivated.
-
If the AGC menu is set to FIX mode, the FLICKERLESS function will be
disabled.
DIS: OFF/ON
Digital Image Stabilization will set the anti-shake compensation.
☞
NOTE:
- If you set DIS to ON the compensation area will be enlarged as set in the digital
zoom factor.
- If you set the digital zoom factor to bigger than the enlarged zoom factor for the
compensation, the DIS function will be deactivated.
DAY&NIGHT: DAY/NIGHT/AUTO/EXT
z
DAY: If set to DAY, it will be fixed to DAY mode regardless of the ambient conditions.
z
NIGHT: If set to NIGHT, it will be fixed to Black-and-White mode regardless of the
ambient conditions. You can set the BURST option to OFF/ON, or select to output
the Burst signal in NIGHT menu. If BURST is set to ON, the Burst signal will output
together with the B/W composite video signal. If BURST is set to OFF, the Burst
signal does not output.
z
AUTO: The camera will automatically switch between DAY and NIGHT mode,
according to the lighting condition. If you press the SETUP key with an WUTO
based submenu selected, you will see the appropriated screen.
You can set the BURST option to OFF/ON, or select to output the Burst signal in
NIGHT mode.
18
OSD Menu Instructions
In the DAY->NIGHT option, you can select from LOW to HIGH for the brightness of
DAY->NIGHT, which is a brightness level in switching from the color filter to Black &
White. Closing to LOW from HIGH will switch the filter in al low contrast scene. The
DWELL TIME of DAY->NIGHT is a time required to determine the need for switching
the filter.
In the NIGHT->DAY option, you can select from LOW to HIGH for the brightness of
NICHT -> DAY, which is a brightness level in switching from the Black & White filter to
color. Closing to LOW from HIGH will switch the filter in a low contrast scene. The
DWELL TIME of NGHT->DAY is a time required to determine the need for switching
the filter.
In the MASK AREA option, you can specify MASK 1 and 2 simultaneously. This
function is used to prevent a filter switch error or inability of determining the switch in
existence of a high spot light source at night.
☞
NOTE:
- If BACKLIGHT is set to BLC, the MASK AREA function will be deactivated.
z
EXT: This enables an auto switch between DAY and NIGHT mode using the
interface with the external sensor. (
NOT Available*
)
This camera is not provide filter switching function in the
Caution!
AUTO option.
WHITE BAL: DAY/NIGHT
If you want to adjust the color scheme, use the WHITE BALACNE function.
z
DAY: In this mode, you can set the color values of RED and BLUE. The screen will
be displayed in colors according to our settings.
☞
NOTE:
- You can set the values of R-GAIN and B-GAIN only in AWC mode.
