15
OSD Menu Instructions
AGC (Auto Gain Control): OFF/VERY LOW~VERY HIGH/USER/FIX
Set the AGC level of the camera. When the AGC is active, the camera automatically
increases the sensitivity by amplifying the Video signal when the strength of the signal
falls below the normal value.
z
USER:
In this mode, you can break down the level in 16 steps from VERY LOW to VERY
HIGH to your preference.
z
FIX:
If you press the SETIP key on FIX, you can fix one of the 16 detailed levels from VERY
LOW to VERY HIGH.
☞
NOTE:
-
If the DAY/NIGHT menu of the CAMERA SET is set to AUTO, the AGC menu
will be deactivated.
-
If FLICKERLESS is set to ON, the AGC FIX mode will be disabled.
-
If you set the BACKLIGHT to WDR, the FIX mode is not available.
DNR: OFF/LOW~HIGH/USER(1~16)
You can configure the DNR(Digital Noise Reduction) related settings.
This is especially useful for a severely distorted screen.
You can set the level if you set DNR to USER.
SHUTTER: OFF, AUTO 1/100(1/120)~1/10K, 1/100(1/120)~1/10K
You can select one of 7 options from 1/100(PAL:1/120) to 1/10K for the fixed high
speed electronic shutter, which is mostly used for snapping a fast moving object. The
auto high speed electronic shutter operates as the fixed high speed shutter in a high
contrast scene but automatically focuses the target if the iris opens fully in a low
contrast scene like in ELC mode. When it gets bright again, the mode will switch to the
fixed high speed electronic shutter mode.
16
OSD Menu Instructions
☞
NOTE:
-
If the IRIS menu is set to ELC, the SHUTTER menu will be deactivated as you
adjust the brightness using the electronic shutter.
-
If the SENS-UP menu is set to AUTO, only items of OFF and AUTO are
available in the SHUTTER menu.
-
If the SENS-UP menu is set to FIX, the SHUTTER menu will be deactivated.
-
If the FLICKERLESS function is set to ON, the SHUTTER menu will be
deactivated.
SENS-UP: OFF/AUTO x2~x256/ FIX x2~x256
Automatically detects the ambient level of darkness in the dark or low contrast scene
to extend the accumulated time, keeping the brightness and sharpness image. It can
be also used as FIX mode.
☞
NOTE:
-
If the SHUTTER menu is set to fixed electronic shutter mode, the SENS-UP
menu will be deactivated.
-
If the FLICKERLESS menu is set to ON, the FIX mode of the SENS-UP will be
disabled.
-
If the IRIS menu is set to ELC, the electronic shutter will control the brightness
so the SENS-UP function can not be set to FIX mode, but to OFF or AUTO
mode.
-
If the SHUTTER menu is set to AUTO, the SENS-UP menu can be set to either
OFF or AUTO mode.
FLICKERLESS: OFF/ON
If set to ON, the shutter speed will be fixed to 1/100(PAL:1/120) second. This will
prevent possible screen distortion due to a mismatch between the vertical sync
frequency and the blinking frequency of the lighting.
