9
3-Axis Gimbal Adjustment
1. First Pan: Adjust the first pan angle
by returning the gimbal 360
˚
degree.
(see the figure No.1)
2. Tilt: Adjust the tilt angle by moving the
gimal up and down.
(see the figure No.2)
3. Second Pan: Loosen the pan screw
(No.3) to adjust the pan to desired angle
And fix the screw. (see the figure No.4)
OSD Menu Instructions
1. If you require to make focal/focus
adjustments, pull the outer lever and
make necessary adjustments.
2. Loosen Zoom & Focus Levers and
Make the viewing angle/focus as shown.
- Field of View: Telephoto(T) to Wide(W)
- Focus: Near(N) to Infinity(
∞
)
1.
After the adjustments, fix Zoom &
Focus Levers and push the outer
lever back in.
Caution!
Unless the outer levers push back in
properly, it touches inside the bubble
and causes scratch.
OSD Menu Instructions
1. OSD Control Key
z
OSD Menu Control
> SETUP Key: Access to the menu mode or confirm the setting
> UP(
▲
)/DOWN(
▼
) key : Choose the desired menu
> LEFT(
◀
)/RIGHT(
▶
) key : Set up the value of the selected menu
z
Using Icons in the Menu
[EXIT] Exits the menu setting. Before you exit the menu setting select SAVE to
save your settings, or select QUIT to cancel.
[RET] Returns to the previous menu.
[HOME] Returns to the main menu.
[SAVE] Used to save your settings of MASK AREA, PRIVACY ZONE and more.
Once you save your settings, they will remain even if you select QUIT in
the menu.
[DEL] Used to deletes your settings of MASK AREA, PRIVACY ZONE and more.
Once you delete your settings, they will not be restored even if you select
QUIT in the menu.
