19
OSD Menu Instructions
z
NIGHT: Use the NIGHT mode if you want to set the white balance differently
according to the ambient luminance. If the NIGHT mode is set to OFF, the white
balance will always operate as set in DAY mode: If not to OFFm the camera will
switched to as set in DAY/NIGHT mode according to the brightness. In NIGHT
mode, you can set the values of RED, BLUE and BIRHGTNESS.
The screen will be displayed in colors according to your settings.
☞
NOTE:
- You can set the values of R-GAIN and B-GAIN only in AWC mode.
- If AGC is set to OFF or FIX, you can not access the NILGHT menu.
For adjusting the white balance, the following 5 modes are provided:
▶
ATW1 (auto Tracing White Balance mode 1):
The camera can automatically adjust the color temperature in real time, according to
the ambient conditions.
The color temperature ranges from approx. 2500K to 9500K.
▶
ATW2: The color temperature ranges from approx. 1800K to 10500K.
▶
AWC (Auto White Balance Control): If ou press the SETUP key in the appropriate
item position, Auto White Balance will perform once.
▶
3200K: Set color temperature to 3200K
▶
5600K: Set color temperature to 5600K
RED: Adjusts the strength of the red color.
BLUE: Adjusts the strength of the blue color.
R-GAIN/ B-GAIN: Enables you to set the current color temperature manually.
BRIGHTNESS: Selects a brightness level in switching from setting in DAY mode to
setting in NIGHT mode.
DIGITAL ZOOM: ON/OFF
You can set the digital zoom factor and position. When the zoom factor and position
are defined, the digital zoom function will operate.
20
OSD Menu Instructions
▶
LOCATION: If you press the SETUP key in the condition where the image is
enlarged as much as the ratio setting, you can watch an invisible area of the effective
screen as well using the direction keys (
◀▶
,
▲▼
).
☞
NOTE:
- The DIGITAL ZOOM function enlarges the pixel itself, which can cause deterioration
of the quality.
DETAIL: 0~3
Controls the horizontal or vertical distinction.
V-SYNC: INT / LINE
Select the vertical sync mode for INT or LINE.
If you select INT, the camera will use the internal synchronization.
If you select LINE, the camera will use the external power source frequency for the
synchronization.
You can adjust the LL-PHASE.
☞
NOTE:
- Use of DC12V will fix V-SYNC to INT, which can not be changed.
AGC COLOR SUP: LOW/MID/HIGH
Adjust the color scheme according to the AGC value.
RVERSE: OFF/H/V/H.V
Mirrors video signals horizontally, vertically or both.
POSI/NEGA: +/-
Output as it is or mirror the video brightness signal.
PIP: OFF/ON
Display a sub image together with the main image on the same screen using the
picture in picture function.
