TBB Energier Pro Series, Руководство пользователя, Страница: 27 / 56

Energier pro User Manual
21
CF(800VA-1600VA) Model
CF(2000VA-4000VA) Model
CF(5000VA-8000VA) Model
Central Panel
Before the installation, you need to do some basic configurations, of which can be done either by DIP switch or through Vision Lite
or Rapconfig. The latest configuration will be saved in the Energier pro bi-directional inverter, no matter through which device.
Following introduction is being prepared for configuration through dipswitch. In case you bought Vision Lite or Rapconfig, please refer to
Vision Lite or Rapconfig for detail introduction.
Loose screws and remove the top panel you will see the central panel where you can finish all the configurations.
If you perform the latest configuration through Vision Lite or Rapconfig and unplug the Vision Lite or Rapconfig,
The setting will be saved in Energier pro bi-directional inverter, of which might not match the setting on DIP switch.
Please always use Vision Lite or Rapconfig to read the latest configuration.