TBB Energier Pro Series, Руководство пользователя, Страница: 14 / 56

Energier pro User Manual
8
Two wires: needs only one relay to control the “start” and “stop” of generator. Please refer to following Figure.
Three wires: needs two relays to control the Generator. Relay 1 control the “ON” and “OFF” of generator. Relay 2 control the
“START” and “STOP” of generator.
The Energier pro bi-directional inverter has an internal or external AGS that can be used to start the Generator upon battery runs low.
To use this function, the Generator needs to have automatic start function. Upon battery runs to low voltage alarm level, signal will be
sent to start the Generator. After generator output stabilized, the Energier pro bi-directional inverter will pass the current to load. AGS
can be programmed as well through Rapconfig for various parameters.
Basically, there are two ways of automatic start:
2.13 AGS (Automatic Generator Start)