- 18 -
The menu SETUP
A touch on the button “SETUP” opens a menu for global settings:
BRIGHTNESS
Use the slider to set the brightness of the backlight of the LCD. Please note that the
backlight uses a high amount of the battery energy. To save battery charge, use the
POWER SAVE option.
Touch to switch between languages used in the menus.
SOUND
Use the slider to set the volume of the sound.
AUTO R
A touch on the button switches this function ON or OFF. When switched OFF, the
amplitude of SQUARE wave signals will be for all frequencies of a program as
assigned in the “123” or “ABC” menus.
When switched ON, the microcontroller calculates the signal strength of SQUARE
waves on the base of each frequency value following a physiological algorithm. The
results override the original amplitude settings.
GLOBAL TIMER A touch on the button switches GLOBAL TIMER ON or OFF. When switched OFF,
the timer settings in the “123” menu may be set individually for each frequency.
When switched ON, the timer settings in the “123” menu is for all 50 frequencies of
the program the same. The global timer becomes active, when the timer setting in
the “123” menu is modified.
GLOBAL
ON or OFF. If enabled the wobble settings will be incurred
WOBBLE
for all frequencies of a program.
LOOP
ON or OFF. If enabled a program which has been started from „123“ or „ABC“ will
loop forever. The only way to stop it is with STOP button.
AUTO OFF
If the text "OFF" is visible inside this button, the AUTO POWER OFF function is
disabled. When touching the button, the number of minutes after which the device
switches off automatically, will increase in one minute steps. The automatic power
off function will be restarted if the device is operated or a program is running or the
device is under software control. The remaining time is being displayed in seconds
on the screen.
POWER SAVE
If enabled, the backlight of the screen will be set to minimum after approx. 1 minute.
Any touch on the display will recover the selected backlight immediately and
restarts the power save timer.
PROTECT
Button to avoid accidental modification of frequencies in protocols.
