- 11 -
The opening screen, as shown above, offers a menu of 5 options. One has to be selected with a touch
to continue the setup of the F-SCAN MOBILE NT for operation.
If the button ”ABC“ is not shown on this menu, the function is either not activated or does not hold any
entries.
The menu “123“
The F-SCAN MOBILE NT offers 100 storage positions for programs of between 1 and 50 frequencies.
The end of each program is a value of 0 Hertz (Hz).
Each program can be named individually.
A number of parameters can be assigned to each frequency value:
- Run time (TIME)
- Signal form (Auto, Sine, Square Half Wave, Square Full Wave, SMART and OFF)
- WOBBLE (Output swings around the target frequency)
- Amplitude (Signal strength) for SINE and Square Wave signals
A touch on the button “123“ opens this menu:
The background of the activated button turns green. Displayed are:
- The program number “1 :“.
- The program name “P1“ can be individually set with up to 20 characters.
- The position (entry) of the frequency within the program – between 1 and 50 – here ”1“. The left
and right yellow arrows can be touched to change the entry number to other frequency values of
the program.
- “DEL“ to delete an entry from the program.
- “INS” to insert an entry to the program.
- The present frequency of “1234.00 Hz“.
- The total runtime of the program of 6 minutes “TT = 6:00“.
- The signal form selected “AUTO“.
- The button “WOBBLE” remains inactive (its background is white).
- The button “ENVELOPE” remains inactive (its background is white).
Page selector for 5 pages of entries
of a program
Output signal indicator.. Shows a
green bar when a signal is
measured at the output.
Indicator where to connect the
application cable FTB308
Indication that a single
channel application with
“123” has been selected
