26/ 42
Inspection
1. The oil pump rotor and oil pump teeth are not abnormally worn.
Install
1. Inject an appropriate amount of oil into the rotor of the oil pump, place the oil pump gasket at the corresponding position of
the oil pump, then place the oil pump at the corresponding position of the right crankcase, take 2 m5×15-5 # inner hexagonal
cylindrical screws and apply an appropriate amount of thread glue, after screwing in, tighten with a fixed torque, torque:
5±1N.m.
Oil filter
System components
No.
Material name
Quantity
Remark
1
Non-standard cap-shaped 9-grade nut m6×13 (zinc
)
3
T-sleeve-10#, constant torque: 10±1N.m
2
ZT1P58MJ oil filter
cover (ceramic)
1
3
Φ51 ×φ2.65 hydrogenated nitrile rubber
O-ring
1
1
2
3
4
5
6
