Taylor TX180S, Руководство по обслуживанию

Страница: 159 / 320

TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07) 9C-10 9C-10
APC User Interface On TICS Transmission Information APC User Interface On TICS Transmission Information Screen Screen
Display mode Display mode Comment Comment
GPOS GPOS Reflects the actually engaged transmission direction and range. Reflects the actually engaged transmission direction and range.
VSPD VSPD Shows vehicle s Shows vehicle s peed in km peed in km /h or /h or MPH MPH (parameter (parameter setting). setting). Speeds are Speeds are
shown with a 0.1 km/h or 0.1 shown with a 0.1 km/h or 0.1 MPH resolution. MPH resolution.
DIST DIST Shows the travelled distance in k Shows the travelled distance in k m or Miles (parameter m or Miles (parameter setting). setting). Distance is Distance is
shown with a shown with a 0.1 km or 0.1 km or 0.1 Mile resolution. 0.1 Mile resolution. By pressing the By pressing the “S” button ( “S” button ( F4) F4)
during 3 seconds, the distance trip counter is reset during 3 seconds, the distance trip counter is reset to 0. to 0.
OPER OPER Shows the total operat Shows the total operat ing time of the veh ing time of the veh icle (engine running). icle (engine running). Operating time Operating time
is shown with a 1 hour resolution and has a range of 0 to 49,999 hour is shown with a 1 hour resolution and has a range of 0 to 49,999 hour s. s. The The
number digits show the hours, the number of dots in between show number digits show the hours, the number of dots in between show the the
number of times 10,000 hours needs to be added to the number shown: number of times 10,000 hours needs to be added to the number shown:
1 1 2 2 3 3 4 4 = = 1234 1234 hours hours
1 2.3.4. = 31234 hours 1 2.3.4. = 31234 hours
CPOS CPOS Reflects the current shift lever direction and position. Reflects the current shift lever direction and position.
ESPD ESPD Shows measured engine speed (RPM) Shows measured engine speed (RPM)
TSPD TSPD Shows measured turbine speed (RPM) Shows measured turbine speed (RPM)
OSPD OSPD Shows measured output speed (RPM) Shows measured output speed (RPM)
SRAT SRAT Reflects the current speed ratio (calculated as TS Reflects the current speed ratio (calculated as TS PD/ESPD [turbine speed / PD/ESPD [turbine speed /
engine speed]) and is an important factor in automatic shifting. engine speed]) and is an important factor in automatic shifting.
TQ I TQ I Measured turbine torque at transmission input side (Nm) Measured turbine torque at transmission input side (Nm)
TTMP TTMP Shows transmission temperature in Shows transmission temperature in
° °
C C
CTMP CTMP Shows cooler input temperature in Shows cooler input temperature in
° °
C C
ERR ERR The error display The error display . . By pressing the “S” button (F4) you can scroll through the By pressing the “S” button (F4) you can scroll through the
errors codes. errors codes. If an error code is If an error code is blinking, this indicates that the blinking, this indicates that the error was error was
active in the past, but not active anymore. active in the past, but not active anymore.
When the controller detects an error, t When the controller detects an error, t he ’E’ led blinks slowly to he ’E’ led blinks slowly to indicate this. indicate this. Y Y ou can always select the ou can always select the
error display mode (ERR) to view the nature of error display mode (ERR) to view the nature of the problem. the problem. An overview of the error codes is included in An overview of the error codes is included in
the back of this section (refer to the back of this section (refer to APC Error Codes and Descriptions APC Error Codes and Descriptions ). ).
Operating Modes Operating Modes
Normal Driving Normal Driving
For detailed description see functional description. For detailed description see functional description.
https://www.forkliftpdfmanuals.com/