Taylor TX180S, Руководство по обслуживанию

Страница: 158 / 320

9C-9 9C-9 TX / TXH / TXB 180S - 400L (Rev. 4/23/07) TX / TXH / TXB 180S - 400L (Rev. 4/23/07)
The second group shows the shift lever position and some other less used but nevertheless quite relevant The second group shows the shift lever position and some other less used but nevertheless quite relevant
values (see below). values (see below).
The third display accessed with the ’M’ button (F3) isn’t actually a group of screens but is used to inform The third display accessed with the ’M’ button (F3) isn’t actually a group of screens but is used to inform
you about any current or previously active errors you about any current or previously active errors . . The display normally shows ’ – – ’ to indic The display normally shows ’ – – ’ to indic ate there are ate there are
no faults, but if one or more faults are (or have been) detected, the most severe one is shown until you no faults, but if one or more faults are (or have been) detected, the most severe one is shown until you
press the ’S’ switch (F4). press the ’S’ switch (F4). Doing so reveals the next error unt Doing so reveals the next error unt il no more errors are present, at w il no more errors are present, at w hich time hich time
again the ’ – – ’ sign is shown. again the ’ – – ’ sign is shown.
https://www.forkliftpdfmanuals.com/