Taylor SYSTEM CD200 SERIES, Руководство по эксплуатации

Страница: 16 / 44

SETTING UP & WELDING
SETTING UP & WELDING
Place the pistol perpendicular to the work piece with the stud
touching down at the desired location to be welded. Press
down on the pistol until the legs come firmly into contact with
the work piece. Press the trigger.
The welding process
is as follows :-
Always lift the welding pistol vertically from the welded stud.
Failure to do this may cause the tines of the chuck to splay
outwards, which will result in the chuck and stud arcing to-
gether during subsequent welds.
Visually inspect the weld. A good weld will result in an all
round weld with a small visible witness of spatter surround-
ing the flange of the stud.
14
INITIAL PRES-
SURE
LIFT & RELEASE STRIKE ARC FUSION & IMMER-
SION
COMPLETED
WELD
LIFT GAP PROCESS, TIME
TAKEN (s) 0.000 0.0005 0.001 0.0015 0.002
CONTACT PROCESS,
TIME TAKEN (s) 0.000 0.001 0.002 0.003