Taylor SYSTEM CD200 SERIES, Руководство по эксплуатации

Страница: 11 / 44

SAFETY
6. INSTALLATION
Ensure that the site chosen for the equipment is able to support the
weight of the equipment and that it will not fall or cause a danger in the
course of its normal operation. Do not hang connecting cables over sharp
edges and do not install connecting cables near heat sources or via traffic
routes where people may trip over them or they may be damaged by the pas-
sage of vehicles (forklifts etc.).
7. INTERFERENCE
During welding operations, intense magnetic and electrical fields are
unavoidably produced and these may interfere with other sensitive electronic
equipment.
As previously mentioned, all personnel wearing heart pacemakers or
other electronically controlled medical devices must be kept well away from
any welding operations.
The welding equipment should be installed at least 5 metres away from
any computer equipment to minimise any possible interaction. Note that ca-
bles carrying signals between electronic devices are also capable of picking
up interference which may modify the way in which those devices function
and therefore should be sited outside the 5 metre zone.
Do not place objects which are sensitive to magnetism near the welding
area, wristwatches, credit cards, computer disks etc. may all be rendered
useless.
The welding equipment, like all other welding equipment, is itself
electronically sensitive and its position relative to other radiation emitting
equipment (mobile phones, remote controls, motor speed controllers etc.)
must be considered.
8. DISPOSAL
The equipment either wholly or any of its component parts may be dis-
posed of as part of general industrial waste or passed to a scrap merchant.
Non of the components used in the manufacture are toxic, carcinogenic or
harmful to health.
9