Taylor SYSTEM CD200 SERIES, Руководство по эксплуатации

Страница: 15 / 44

SETTING UP & WELDING
SETTING UP & WELDING
SETTING THE PISTOL
MkV LIFT GAP PISTOL (CONTINUED)
It is at this point that further twisting of the end cap
begins to lift the tripod legs/nosecone away from the
plate.
The pistol is now in the zero lift position and twisting
the rear end cap anti-clockwise by one "click" at a time
will increase the lift by 0.25 mm increments (see the
tables on pages 16 - 22 for suggested settings).
Switch the controller ON.
Select the required welding voltage
by turning the selector knob. The
voltage is adjustable between 25
and 200 volts in 1 volt steps.
13