Taylor SB25, Руководство по обслуживанию

Страница: 42 / 72

38
Troubleshooting
Model SB25
General Troubleshooting
PROBLEM POSSIBLE CAUSE REMEDY
Blender pitcher is damaged. Abuse or excessive wear. Replace blender pitcher.
Shaved ice has inconsistent texture. The shaver blade is worn. Replace the shaver blade.
Unit runs, but does not shave ice. The ice hopper is empty. Refill the hopper.
The shaver blade is damaged. Replace the shaver blade.
Unit runs, but does not blend ice. Wrong volume or product was
added. Remeasure and pour product.
Wrong volume of ice. Check the ice volume. Adjust
calibration as needed.
Wrong volume of water. Check the water volume. Adjust
calibration as needed.
Wrong volume of cane sugar. Check the cane sugar volume.
Adjust calibration as needed.
Unit has no power and no lights. The power switch is OFF Place the power switch in the ON
position.
The power cord is not plugged in. Check the connection at the
outlet and ensure the outlet is
functioning.
Safety switch is open. Ensure that the hopper cover is
properly seated on the hopper.
Drive board and/or dispense
board issue and/or fuse blown. Check motors, replace board /
fuse.
Water is not dispensing. Water line at the back of the unit
is not connected. Connect the water line.
Water line is kinked. Straighten water line.
Low water pressure in the store. Check filter and store plumbing.
Water is leaking from the unit. Poor fitting/hose connection. Check all visible fittings and
ensure all hoses are fitted into
the fittings properly.
Cracked hose. Replace cracked hose.
Broken fitting. Replace fitting.