![background image](http://html.mh-extra.com/html/taylor/qs10/qs10_operating-instructions-manual_822783006.webp)
2
Models QS10 & QS22
To the Installer
Installation of Cable Kit
Kit A.-3 Ft. Restrain Cable (part no. 074948) must
be installed to limit the movement of the grill. This is
necessary in order to protect the electrical conduit
from stress. The cable is made of flexible conduit.
To install the kit, look at the back of the unit. There
is a 1/2” hole on the left side of the frame, about half
way down. Remove the plug and attach the cable.
Ventilation and Clearance
To ensure proper operation of this appliance it must
be installed so that products of combustion are
efficiently removed. Do not store anything on top of
the grill.
Most service can be performed from the front of the
grill. When inspecting heating elements, the unit
must be disconnected and pulled out of the hood
enclosure. Allow four feet in front of the appliance
for this purpose.