manualshive.com logo in svg

Taylor K-8000, Руководство пользователя, Страница: 97 / 100

Поделиться
Скачать
Taylor K-8000 Скачать руководство пользователя страница 97

8-3

TTi

®

 

Colorimeter User’s Manual

Part 8  

Compliance Synopsis

CERTIFICATION

The TTi

®

 Colorimeter Series is certified to the following instrumentation Directives and Standards: 

•  Directive 2004/108/EC, Electromagnetic Compatibility Directive
•  Directive 2006/95/EC, Low Voltage Directive
•  FCC, Radio Frequency Devices, Unintentional Radiators, 47 CFR Part 15, Subpart B
•  UL 61010-1 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory 

Use - Part 1: General Requirements

•  ICES-003 - Issue 4 February 2004 - Spectrum Management and Telecommunications Policy -  

Interference-Causing Equipment Standard - Digital Apparatus

•  CSA C22.2 No. 61010-1 - Safety Requirements for Electrical Equipment for Measurement, Control, and 

Laboratory Use - Part 1: General Requirements

•  EN 61326-1:2006 - Electrical Equipment for Measurement, Control and Laboratory Use -  

EMC Requirements – Part 1: General Requirements

•  EN 61010-1:2001 - Safety Requirements for Electrical Equipment for Measurement, Control, and  

Laboratory Use - Part 1: General Requirements

•  IEC 61010-1 - Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory 

Use - Part 1: General Requirements 

INFORMATION TO THE USER

The user is cautioned that if the instrument is used in a manner not specified by Taylor Technologies, Inc., the 

protection provided by the instrument may be impaired.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired 

operation.

The user is cautioned that changes or modifications not expressly approved by Taylor Technologies, Inc., could 

void the user’s authority to operate this equipment.

NOTE:

  This equipment has been tested and found to comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio  

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no guarantee that interference will not occur in a 

particular installation. If this equipment does cause harmful interference to radio or television reception,  

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 

interference by one or more of the following measures: 

•  Reorient or relocate the receiving antenna
•  Increase the separation between the equipment and receiver
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
•  Consult the dealer or an experienced radio/TV technician for help

Содержание K-8000





































































































Отзывы:

Нет отзывов