Taylor K-8000, Руководство пользователя, Страница: 44 / 100

3-18 TTi
®
Colorimeter User’s Manual
Part 3 Colorimeter Operation
STEP 1
Select
TIMER
using  ; then press ENTER .
The TIMER 1 screen will be displayed.
The timer will open to the preprogrammed time, even if the timer
was previously set to a different time.
If multiple timers are used in a test,  will appear to the right of
each timer. Use  to scroll between timers. All preprogrammed
timers can be accessed and edited at any time during a test. If a
test does not require a timed step, a nonprogrammed timer will be
available for use.
Footer Options: Select using  ; then press ENTER .
START
Starts the timer. The timer icon will be enabled and flash in the title
bar until the timer countdown expires.
EXIT
Returns to the previous test screen:
• When the timer is exited while it is stopped, the timer resets to
the preprogrammed time.
• When the timer is exited while it is running, the timer will
continue to count down when the timer screen is reentered.
• When the timer is exited (using either AUTO or EXIT) and a ZERO
has already been performed, the display returns to the test
screen with READ highlighted.
• When the timer is exited (using either AUTO or EXIT) and a ZERO
has not been performed, the display returns to the test screen
with ZERO highlighted.
SET
Goes to editing mode (see Timer Edit below).
RESET
Resets the timer to the preprogrammed time. When the timer is
RESET while it is running, the timer stops and then resets to the
preprogrammed time.