Taylor K-8000 Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 100

Taylor K-8000 Скачать руководство пользователя страница 34

3-8

TTi

®

Colorimeter User’s Manual

Part 3

Colorimeter Operation

EXAMPLE 4

Title Bar + Main Footer Sections

The

title bar

shows the SET DATE screen. The battery status icon

is displayed.

The

main window

shows the date format and SET DATE prompt.

Use the



,



arrows on the keypad to set the date. This type

of screen format is used for setting the date and time. The left and
right scroll arrows move to the next unit, while the up and down
scroll arrows select the character. The numbers are highlighted
upon entering the screen.

The

footer

shows the OK option. After setting the date, OK is

selected.

ICONS AND SYMBOLS

ICONS

AC (Adjust Calibration)

Displayed in the title bar when the test result has been adjusted to agree with a prepared standard. The adjusted calibration
icon will remain on for that specific test unless turned off by the user. The next time that specific test is selected from the
test menu, the adjust calibration icon will remain on.

Timer

Displayed in the title bar when the timer is started in a Taylor- or user-developed test. While the timer is running, the icon
will flash. When the timer expires, the icon will remain solid until a key is pressed, at which point it will be turned off. This
icon is not enabled or disabled by the User Timer, located in Tools.

Battery Status

Displayed in the title bar when the instrument is powered by batteries. Informs user how much power is remaining (3 bars
indicate a full charge; 0 bars indicate a very low charge).

USB

Displayed in the title bar when the instrument is powered by USB.

SYMBOLS

Action

Indicates an action operation

Information

Indicates relevant information

Error

Indicates an operational error

Warning (flashing)

Indicates an operational warning

Sample Cell

Indicates sample cell viewdepth used in a test

«
...
32
33
34
35
36
...
»

Содержание K-8000





































































































Отзывы:

Нет отзывов