Taylor K-8000 Скачать руководство пользователя страница 18

Страница: 18 / 100

1-8

TTi

Colorimeter User’s Manual

Part 1

General Information

CONTACTING TAYLOR TECHNOLOGIES

General Office:

410-472-4340

Our business hours are 8:00 a.m.–4:45 p.m. (Eastern Time), Monday through Friday,

except major holidays.

Customer Service:

800

-TEST KIT (837-8548)

Customer service representatives are available 8:00 a.m.–5:00 p.m. for application-

specific advice, to open an account, place an order, inquire about order status, or

report a problem with a shipment. If you require more advanced technical assistance,

your call or e-mail will be forwarded to the appropriate resource. You may also leave

us a voice-mail or e-mail message at anytime.
Exchanges and credits are only considered within 30 days of shipment.

Please check

your order upon receipt and notify us immediately if there is any problem.

assure the quality of our chemistries, we do not resell reagents returned to us. For this

reason they cannot be returned for credit, unless the reagents were shipped in error

by Taylor or their quality was compromised before they were shipped. To apply for an

exchange or credit under these mitigating circumstances, you will need to know the

lot number located on the lower left-hand corner of the reagent label.

Technical

800

-TEST KIT (837-8548)

Assistance:

General assistance for TTi

Colorimeter owners is available Monday through Friday

from 8:00 a.m. – 4:45 p.m. Eastern Time, except major holidays, from Taylor Technol-

ogies’ customer service group by calling 800-TEST KIT (837-8548). Outside normal

business hours you may record a message for us by using the same toll-free number,

or you can leave an e-mail message using [email protected].

877

-TEST KIT (837-8548)

Help specifically related to the

TTi

Colorimeter Series PC App

is available

9:00 a.m.–5:00 p.m. (Pacific Time), Monday through Friday (except major holidays),

from Taylor Technologies’ programmers. Online guidance may be found at

www.taylorsoftwaresupport.com. Enter through the TTi

Colorimeter portal.

E-mail: [email protected]
Fax: 410-771-4291
Mailing Address:

Taylor Technologies, Inc.

31 Loveton Circle

Sparks, Maryland 21152

USA

Corporate Website:

www.taylortechnologies.com

Here you will find product descriptions, including test instructions, potential interfer-

ences, and Safety Data Sheets; video product demonstrations; high- and low-resolution

product photography; and articles of interest to water analysts. While online, you may

apply for an open-terms account, place an order, or post a question for our staff.

Software Website:

www.taylorsoftwaresupport.com

This site is dedicated to supporting Taylor software products only. Enter through the

TTi

Colorimeter portal.

Содержание K-8000





































































































Результаты поиска

Содержание K-8000

Отзывы:

Taylor K-8000, Руководство пользователя, Страница: 18 / 100

Результаты поиска

Содержание K-8000

Отзывы: