manualshive.com logo in svg

Taylor C832, Руководство по обслуживанию

Поделиться
Скачать
Taylor C832 Скачать руководство пользователя страница 8

 2

Introduction

McDonald's Intelligap Grills

Safety

We, at Taylor Company, are deeply committed to
manufacturing safe operating and serviceable
equipment. The many built-in safety features that
are part of all Taylor equipment are aimed at
protecting operators and trained service technicians
alike.

 This manual is intended exclusively for

Taylor Company authorized service personnel.

 DO NOT

 operate the grill before reading

the Operator's Manual. Failure to follow this
instruction may result in equipment damage, poor
grill performance, health hazards, or personal injury.

 In all areas of the world, equipment should

be installed in accordance with existing local codes.
Please contact your local authorities if you have any
questions.

Care should be taken to ensure that all basic safety
practices are followed during the installation and
servicing activities related to the installation and
service of Taylor equipment.

S

Only authorized Taylor service personnel
should perform installation and repairs on
the equipment.

S

Authorized service personnel should consult
OSHA Standard 29CFRI910.147 or the
applicable code of the local area for the
industry standards on lockout/tagout
procedures before beginning any installation
or repairs.

S

Authorized service personnel must ensure
that the proper PPE (Personal Protective
Equipment) is available and worn when
required during installation and service.

S

Authorized service personnel must remove
all metal jewelry, rings, and watches before
working on electrical equipment.

Take precautions to protect eyes, lungs, and

all parts of the body from potential harm when using
any chemical cleaner. Failure to follow this
instruction may result in a chemical burn. Please
refer to the product MSDS for additional safety
information.

 Use extreme caution when installing,

servicing, operating, and cleaning the grill.

S

AVOID CONTACT

 with hot grill surfaces or

hot grease.

S

DO NOT

 prepare or remove product without

proper equipment.

S

DO NOT

 allow untrained personnel to

operate the grill.

S

Use extreme caution when cleaning the grill.

Failure to follow these instructions could result in
severe burns from high temperatures.

This equipment must be properly

grounded!

Do not operate this unit unless it is properly
grounded and all service panels and access doors
are restrained with screws. Failure to do so can
result in severe personal injury from electrical shock!

S

DO NOT

 operate the grill with larger fuses

than specified on the data label.

S

DO NOT

 attempt any repairs unless the

power supply to the grill has been
disconnected.

Failure to follow these instructions may result in
severe personal injury from electrical shock.

Содержание C832




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды