manualshive.com logo in svg

Taylor C832, Руководство по обслуживанию

Поделиться
Скачать
Taylor C832 Скачать руководство пользователя страница 51

 45

McDonald's Intelligap Grills

Controls and Systems

Figure 34 

To exit this screen, press the 

 key.

“MORE”

 - Pressing the 

 key displays:

Figure 35 

Selecting “MANU” allows the technician to move the
upper platen (3 motors) to a specific gap. This can
be used to determine if the motors are moving
accurately from one position to the next by
measuring the gap at the first position and then at
the second position.

Selecting “AUTO” can be used to measure the
thickness of a standard disk. The control displays
the product which falls within that measurement and
also the data captured for each motor. This can be
used to identify a motor which is not performing to
specification.

To exit this screen, press the 

 key.

“STOP”

 - Pressing the 

 key will manually stop

the signal to the platen motors. To exit this screen,

press the 

 key.

TEMP

Pressing the 

 key will display:

Figure 36 

“TOP” -

 Pressing the 

 key under “TOP” will

display the “TOP TEMPS.”

Figure 37 

Pressing the key below each zone will activate or
de-activate each heater. (

Note:

 Temperatures

cannot be calibrated from this menu.)

IMPORTANT: Remember to shut the heater off.

To exit this screen, press the 

 key.

Содержание C832




























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды