OPERATING PROCEDURES
6-3
Model C707
Operating Procedures
6
11. Install the draw valve
:
Slide the two O-rings into the
grooves on the draw valve and lubricate.
Figure 6-6
12. Lubricate the inside of the freezer door spout, top
and bottom, and insert the draw valve
from the top
until the draw valve is at the bottom.
Figure 6-7
13. Slide the two O-rings into the grooves on the prime
plug. Apply an even coat of Taylor Lube to the
O-rings and shaft.
Figure 6-8
14. Insert the prime plug into the hole in the top of the
freezer door and push down.
Figure 6-9
11154
Apply the appropriate
Taylor approved food safe lubricant.
101553
Apply the appropriate
Taylor approved food safe lubricant.
11092
Apply the appropriate
Taylor approved food safe lubricant.
101554
Содержание C707
Страница 16: ...4 4 OPERATOR PARTS IDENTIFICATION Model C707 Operator Parts Identification 4 Notes ...
Страница 36: ...9 2 PARTS REPLACEMENT SCHEDULE Model C707 Parts Replacement Schedule 9 Notes ...
Страница 40: ...10 4 LIMITED WARRANTY ON MACHINES Model C707 Limited Warranty on Machines 10 Notes ...
Страница 44: ...11 4 LIMITED WARRANTY ON PARTS Models C707 Limited Warranty on Parts 11 Notes ...
