Additional detailed daily, weekly and monthly history rainfall data
may be viewed.
Press “
HISTORY
” to toggle through Weekly, Monthly, Last Hour, and
Last 24 Hour rainfall readings.
Press and hold “
HISTORY
” while the desired reading is displayed,
The “0” (current) bar graph will appear, and the data will replace
the time digits. Press “
UP
” or “
DOWN
” to scroll through the daily,
weekly or monthly data.
The rainfall reading is accumulative. To clear/reset rainfall data,
press “
CLEAR
” while that data (weekly, monthly, etc.) is displayed.
Please note:
The “0” on the bar chart indicates the current period. A -1,-2, etc., indicates the
prior periods. The X10 MM icon appears when the unit is set to millimeters. One bar graph will
appear for every 10 millimeters of rainfall.
The rain alert icon appears when the rain collection cup is filling with water from
any source, such as rainfall or a sprinkler.
Your Wireless Rain Gauge will indicate if temperatures are rising, falling, or steady.
Indicates Rising Temperatures readings (temperatures have gone up more than 2
degrees in an hour)
Indicates Falling Temperatures (temperatures have gone down more than 2
degrees in an hour)
Indicates Steady Temperature readings.
Rainfall History (continued)
Rain Alert Icon
Temperature Readings
Temperature Trend Indicators
Top of Base Unit
Upon setup, the base unit will first show the indoor temperature at the base unit location, and
then it will switch to the outdoor temperature of the rain cup sensor location.
To switch between Indoor/Outdoor readings, press “
IN-OUT TEMP
” on back of the base unit.
An “IN” icon indicates indoor readings. An “OUT” icon indicates outdoor readings.
Auto Scroll feature – the base unit can be set to automatically toggle between indoor and
outdoor temperature readings. (Rainfall reading will remain steady, since they are only
calculated outdoors.) To activate Auto Scroll, press and hold “
IN-OUT TEMP
” on the base unit
for 3-4 seconds. The auto scroll icon ” ” appears on the base unit LCD readout above the
IN/OUT icons.
To deactivate the Auto Scroll feature, press and hold “
IN-OUT TEMP
” on the base unit for 3-7
seconds. The Auto Scroll icon ” ” will disappear. Press “
IN-OUT TEMP
” to switch between
indoor or outdoor readings if desired.
6
