Taylor 2753, Инструкция по эксплуатации

Страница: 4 / 9

4
In the following order, you may set the calendar, time, 12 or 24 hour mode, °F or °C
temperature scale, and the measurement units for rainfall (inches or millimeters). To set up,
use the buttons on the back of the base unit.
Press and hold “ MODE ” for 3-4
seconds. The year digits flash.
Press “ UP ” or “ DOWN ” to change
the year. Press “ MODE ” to enter.
The month digit flashes.
Press “ UP ” or “ DOWN ” to change
the month. Press “ MODE ” to enter.
The date digit flashes.
Press “ UP ” or “ DOWN ” to change
the date. Press “ MODE ” to enter.
The hour digits flash.
Press “ UP ” or “ DOWN ” to change
the hours. Press “ MODE ” to enter.
The minute digits flash.
Press “ UP ” or “ DOWN ” to change
the minutes. Press “ MODE ” to
enter. The 12/24 hour clock option
flashes.
Press “ UP ” or “ DOWN ” to change
the 12/24 hour clock option. Press
“
MODE ” to enter. The °F/°C
temperature scale option flashes.
Press “ UP ” or “ DOWN ” to change
the °F/°C temperature scale
option. Press “
MODE ” to enter. The
rainfall reading option flashes.
Press “ UP ” or “ DOWN ” to change
the rainfall reading option (INCH
for inches or MM for millimeters).
Press “
MODE ” to enter.
Set Up is complete.
Tip: Hold down “ UP ” or “ DOWN ” to
advance the digits quickly.
How to Set Up the Base Unit
.1
.2
.3
.4
.5
.6
.7
.8
.9
.10