Taylor 104, Руководство оператора

Страница: 9 / 40

Section 2
2-1
Model 104
To the Operator
2
To the Operator
The freezer you have purchased has been carefully
engineered and manufactured to provide dependable
operation. The Taylor Model 104 Batch Ice Cream
freezer, when properly operated and cared for, produces
a consistent quality product. Like all mechanical
products, this machine requires cleaning and
maintenance. A minimum amount of care and attention is
necessary if the operating procedures outlined in this
manual are followed closely.
NOTICE! DO NOT operate this machine
without reading this entire manual first. Failure to follow
all of these operating instructions may result in damage
to the machine, poor performance, health hazards, or
personal injury.
Model 104 does not compensate and correct for any
errors during the setup or filling operations. Therefore,
the initial assembly and priming procedures are of
extreme importance. It is strongly recommended that
personnel responsible for the machine’s operation, both
assembly and disassembly, go through these procedures
together to be properly trained and to make sure that no
misunderstandings exist.
If you require technical assistance, please contact your
local authorized Taylor distributor.
Note: Your Taylor warranty is valid only if the parts
used are authorized Taylor parts purchased from the
local authorized Taylor distributor, and only if all required
service work is provided by a Taylor service technician.
Taylor reserves the right to deny warranty claims on units
or parts if Taylor-unapproved parts or incorrect refrigerant
were installed in the unit, if system modifications were
performed beyond factory recommendations, or if it is
determined that the failure was caused by abuse,
misuse, neglect, or failure to follow all operating
instructions. For full details of your Taylor warranty, see
the Limited Warranty section in this manual.
IMPORTANT! If the crossed-out wheeled-bin
symbol is affixed to this machine, it signifies that this
machine is compliant with the EU Directives as well as
other similar end-of-life legislation in effect after August
13, 2005. Therefore, it must be collected separately after
its use is completed and cannot be disposed as unsorted
municipal waste.
The user is responsible for returning the machine to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
disposal laws, please contact the municipal waste facility
and/or local authorized Taylor distributor.