tayco Norris Boardroom Table 1 Surface, Руководство по установке, Страница: 13 / 20

Norris boardroom table – 2 Surfaces
Figure 1
Tools & Hardware Needed
8540-1282
Box Wrench 3/8-16" X 1-1/2"
Hex Bolt (12X)
The procedure below is for Boat,
Straight, Super Ellipse and Video
boardroom tables.
1.
Assemble the table base, using
3/8-16” X 1-1/2” Hex Bolt,
(Figure 1).
2.
Attach bolts from the thru
holes on the inside of bridge to
the threaded holes on the
plinth.
3.
Attach bolts from the thru
holes on outside of the end
gable to the threaded holes on
the bridge.
Note: The steel gables for Video
boardroom tables have two
different sizes. The wide one is for
the wider side of the surface.
Continued on the next page >>
FEBRUARY 2020 norris 10