tayco Norris Boardroom Table 1 Surface, Руководство по установке

Страница: 12 / 20

Norris boardroom table – 1 Surface
Figure 8
Figure 9
Tools & Hardware Needed
8540-1280
Drill Allen Key 1/4-20 X 35MM
JCB BOLT (8X)
11.
Angle the end gable at 30
degrees; Insert the Z brackets
into the slots of the steel gable
and push the gable cover
gently, (Figure 8).
Repeat this procedure for each
gable cover required.
12.
Attach the bridge cover, using
1/4-20 X 35mm JCB bolts,
(Figure 9).
FEBRUARY 2020 norris 9