tayco Norris Boardroom Table 1 Surface, Руководство по установке

Страница: 11 / 20

Norris boardroom table – 1 Surface
Figure 6
Figure 7
Tools & Hardware Needed
8540-1279 8485-0274 8540-0789_SCREW 8540-0587
Drill Robertson # 2 ‘V’ Knuckle Strike
(4X) Z- Bracket (4X) #10 X 11/16" Pan
Head Screw (8X) #6 X 5/8" Pan Head
Screw (8X)
7.
Pull the ‘V’ knuckle strikes from
the ‘V’ knuckle catch of the
steel gables, (Figure 6).
8.
Securely fasten the ‘V’ knuckle
strikes to outer gable cover,
using #6 X 5/8” Pan Head
Screws into the pre-drilled
holes, (Figure 7).
9.
Securely fasten the Z-brackets
to outer gable cover, using #10
X 11/16” Oval Head Screws into
the pre-drilled holes, (Figure 7).
10.
Follow Steps 8 to 9 to install
the hardware of the inner gable
covers.
Continued on the next page >>
FEBRUARY 2020 norris 8