Tayama TXM-60XL, Руководство пользователя

Страница: 13 / 15

8. To reinsert the Lid Liner/Sealing Ring, align the center hold in the Lid Liner with
raised metal shaft located in the center of the Inner Lid and press firmly into place.
The Lid Liner is not reversible and therefore must be correctly inserted into the lid.
(See picture 21)
Warning
USE EXTREME CAUTION DURING OPERATION
1. Do not place hands near, or come in close contact with the pressure release valve
when pressure release is in process. Burns, scalding and/or injury may result.
2. Do not touch the lid during the cooking process, or while unit is hot and pressurized.
3. Do not cover the gap between the lid and the outer cooker. Do not cover the
pressure cooker.
4. Keep away from children
5. Do not place the Inner Pot on other heat sources.
6. Do not use metal utensils when removing food from the Inner Pot as they may
scratch the surface of the pot.
7. Do not disassemble the unit. Only use replacement parts certified and provided by
the manufacturer.
8. During operation, if the unit sounds an alarm and/ or the display shows Error codes
(E01, E02. E03 or E04), please stop using and contact Customer Service for
assistance.
9. After cooking, unplug the power supply before enjoying your meal.
IMPORTANT INFORMATION
If there is steam coming out the sides and the Pressure Valve on top of the Lid is in the
“ Seal ” position, then the Lid has not seated. This sometimes happens when the unit is new.
If the Sealing Ring is in place try pushing down on the Lid. This should seal the Lid and the
steam should stop coming out. It is also important to be sure the Float Valve is assembled
correctly. Incorrect assembly may cause steam to come out the sides or prevent pressure
from building. The Float Valve should be able to move up and down freely only stopping
when the silicon gasket meets the Lid. It is however normal for condensation to appear in
the condensation collector.
11